Fifield Fab Custom Car Audio - ANDROID TABLET KITS
Fifield Fabrications - YOUR BEST SOURCE FOR ALL YOUR CUSTOM TABLET NEEDS!!!!
TABS397-SDS
TABS397-SDS is a full face Slidedock kit for the Samsung Galaxy Tab S3 9.7"". This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a dock cable must be glassed or epoxied in to hold the tablet under the retainer lips. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing the tablet. There is a slight recess behind the tablet to allow for camera clearance to prevent scuffing of camera. There are 1/8" overhanging edges on the the dock connector side and top edge of the tablet which allows the tablet to be mounted vertically without a problem. These edges are 3/32" thick. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 7 1/4" X 10 3/16" X 1/2" once the flange edge is removed. With the flange edge it is 8 3/16" x 11 7/8". $99.95
Price: $99.95
TABS297-SDS
TABS297-SDS is a full face Slidedock kit for the Samsung Galaxy Tab S2 9.7"". This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a dock cable must be glassed or epoxied in to hold the tablet under the retainer lips. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing the tablet. There is a slight recess behind the tablet to allow for camera clearance to prevent scuffing of camera. There are 1/8" overhanging edges on the the dock connector side and top edge of the tablet which allows the tablet to be mounted vertically without a problem. These edges are 3/32" thick. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 7 1/4" X 10 3/16" X 1/2" once the flange edge is removed. With the flange edge it is 8 3/16" x 11 7/8". $99.95
Price: $99.95
TABS105-SL
TABS105-SDS is a full face Slidedock kit with a "SPRING LOADED" BACK for the Samsung Galaxy Tab S 10.5". This kit is designed to "Drop in", push the tablet down and slide into usb connector to lock in under the retainer lips. To release, just slide tablet away from connector and the kit automatically pushes the tablet out!. There is a dock connector opening and a dock cable must be glassed or epoxied in to hold the tablet under the retainer lips. There are 1/8" overhanging retainer lips on the the dock connector side and top edge of the tablet which allows the tablet to be mounted vertically without a problem. These edges are 3/32" thick. Dimensions are 7 1/2" X 10 9/16" X 5/8" once the flange edge is removed. With the flange edge it is 8" x 12". $114.95
Price: $114.95
TABS105-SDS
TABS105-SDS is a full face Slidedock kit for the Samsung Galaxy Tab S 10.5". This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a dock cable must be glassed or epoxied in to hold the tablet under the retainer lips. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing the tablet. There is a slight recess behind the tablet to allow for camera clearance to prevent scuffing of camera. There are 1/8" overhanging edges on the the dock connector side and top edge of the tablet which allows the tablet to be mounted vertically without a problem. These edges are 3/32" thick. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 7 1/2" X 10 9/16" X 1/2" once the flange edge is removed. With the flange edge it is 8" x 12". $99.95
Price: $99.95
TABS8-SDS
Copy attached YouTube link to see a brief video of this product: https://youtu.be/MDfuBajMtY0 TABS8-SDS is a full face Slidedock kit for the Samsung Galaxy Tab S 8". This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a dock cable must be glassed or epoxied in to hold the tablet under the retainer lips. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing the tablet. There is a slight recess behind the tablet to allow for camera clearance to prevent scuffing of camera. There are 1/8" overhanging edges on the the dock connector side and top edge of the tablet which allows the tablet to be mounted vertically without a problem. These edges are 3/32" thick. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 5 7/16" X 8 13/16" X 1/2" once the flange edge is removed. With the flange edge it is 5 15/16" x 9 3/8 ". $79.95
Price: $79.95
TABA101-SDS
TABA101-SDS is a full face Slidedock kit for the Samsung Galaxy Tab A 10.1"SM_T580. This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a dock cable must be glassed or epoxied in to hold the tablet under the retainer lips. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing the tablet. There is a slight recess behind the tablet to allow for camera clearance to prevent scuffing of camera. There are 1/8" overhanging edges on the the dock connector side and top edge of the tablet which allows the tablet to be mounted vertically without a problem. These edges are 3/32" thick. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 6 3/4" X 10 7/8" X 1/2" once the flange edge is removed. With the flange edge it is 7 7/8" x 11 7/8". $109.95
Price: $109.95
TABA8-SDS
TABA8-SDS is a full face Slidedock kit for the Samsung Galaxy Tab A 8". This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a dock cable must be glassed or epoxied in to hold the tablet under the retainer lips. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing the tablet. There is a slight recess behind the tablet to allow for camera clearance to prevent scuffing of camera. There are 1/8" overhanging edges on the the dock connector side and top edge of the tablet which allows the tablet to be mounted vertically without a problem. These edges are 3/32" thick. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 6" X 8 7/8" X 1/2" once the flange edge is removed. With the flange edge it is 7 3/16"" x 10". $79.95
Price: $79.95
TAB48-SDS
TAB48-SDS is a full face Slidedock kit for the Samsung Galaxy Tab4 8". This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a dock cable must be glassed or epoxied in to hold the tablet under the retainer lips. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing the tablet. There is a slight recess behind the tablet to allow for camera clearance to prevent scuffing of camera. There are 1/8" overhanging edges on the the dock connector side and top edge of the tablet which allows the tablet to be mounted vertically without a problem. These edges are 3/32" thick. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 5 7/16" X 8 13/16" X 1/2" once the flange edge is removed. With the flange edge it is 5 15/16"" x 9 1/4". $79.95
Price: $79.95
TAB47-SDS
TAB47-SDS is a full face Slidedock kit for the Samsung Galaxy Tab4 7". This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a dock cable must be glassed or epoxied in to hold the tablet under the retainer lips. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing the tablet. There is a slight recess behind the tablet to allow for camera clearance to prevent scuffing of camera. There are 1/8" overhanging edges on the the dock connector side and top edge of the tablet which allows the tablet to be mounted vertically without a problem. These edges are 3/32" thick. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 4 7/8" X 8 1/8" X 9/16" once the flange edge is removed. With the flange edge it is 5 5/8" x 8 5/8". $74.95
Price: $74.95
TAB3-SDS
TAB3-SDS is a full face Slidedock kit for the Samsung Galaxy Tab3 7". This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a dock cable must be glassed or epoxied in to hold the tablet under the retainer lips. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing the tablet. There is a slight recess behind the tablet to allow for camera clearance to prevent scuffing of camera. There are 1/8" overhanging edges on the the dock connector side and top edge of the tablet which allows the tablet to be mounted vertically without a problem. These edges are 3/32" thick. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 5 3/16" X 8 9/16" X 5/8" once the flange edge is removed. With the flange edge it is 5 11/16"" x 9 11/16". $74.95
Price: $74.95
Finish Preference:
CUSTOM CUT OUT MOD
This is labor Modification add-on for ANY of our SDS, SDC, OR SD style kit. We can offer a centered single din or double din ISO cut out in the back plate or other options. Please specify single or double din.
Price: $20.00
CUT CHOICE:
TAB3-SD
TAB3-SD SlideDock kit. Kit comes as a full bucket made of ABS plastic with 1/8" overhanging edges all around the front. Either a side or top edge can be cut off to create a slide in dock sleeve for vertical or horizontal mounting. Solid back plate can be cut out to expose radio or a/c controls.There is no dock connector opening, Bluetooth audio is recommended. Dimensions 5 3/16" X 8 3/16" X 5/8" without flange. with flange 5 11/16" X 8 11/16" X 5/8". $57.95
Price: $57.95
Finish Preference:
NEXUS7-SLS
NEXUS7-SLS Mounting kt for the 2013 NEXUS 7 TABLET. This is our most secure kit yet! The tablet drops onto the spring loaded tray towards the dock connector opening. Dock connector is NOT required to hold the tablet into the kit. You push the tablet toward the dock side, which slides the tray with the tablet down into the kit then the spring loaded tray pushes the tablet under the 1/8" retainer lips, locking it into place. To release, slide the tablet back towards the dock and the tray automatically pushes the tablet up and out for removal. The top edge is rounded, textured, and beveled which makes it great for surface mounting applications. It can also be used for custom glassed in applications. when surface mounting, the mounting surface on the dock side can only be 1/8" thick to clear the spring shafts and dock cable. Top flange dimensions are 6 1/4" x 10 3/16". Without flange it is 5 1/8" x 8 5/8" x 13/16" We also have a wireless charger dock upgrade that can be added to this kit. see add-on below. Retail price is $129.95
Price: $129.95
CHOETECH DOCK FOR NEXUS7-SLS
THIS IS A UPGRADED ADD ON ONLY FOR THE NEXUS7-SLS KIT. You must purchase the choetech wireless charger separately! This add-on creates a dock on the back of the NEXUS7-SLS for the charger to be secured. Labor cost is $15
Price: $15.00
Nexus7-SDS
Nexus7-SDS is a full face Slidedock kit for the Nexus 7 Gen 2 2013 7" tablet. This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a dock cable must be glassed or epoxied in to hold the tablet under the retainer lips. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing the tablet. There are 1/8" overhanging edges on the the dock connector side and top edge of the tablet which allows the tablet to be mounted vertically without a problem. These edges are 3/32" thick. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 5 1/8" X 8 5/8" X 13/16" once the flange edge is removed. With the flange edge it is 6 3/16" x 9 7/16". $79.95
Price: $79.95
NEXUS7-SD
NEXUS7-SD Nexus 7 SlideDock kit. Kit comes as a full bucket made of ABS plastic with 1/8" overhanging edges all around the front. Either a side or top edge can be cut off to create a slide in dock for vertical or horizontal mounting. Solid back plate can be cut out to expose radio or a/c controls.There is no dock connector opening, Bluetooth audio is recommended. Dimensions 5 13/16" X 9 3/16". Can be cut to a minimum of 5 1/16" X 8 5/16".$57.95
Price: $57.95
Finish Preference:
GALAXY101-SD
GALAXY101 SlideDock sleeve kit. Kit comes as a full bucket made of ABS plastic with 1/8" overhanging edges all around the front. Either a side or top edge can be cut off to create a slide in dock for vertical or horizontal mounting. Solid back plate can be cut out to expose radio or a/c controls.There is no dock connector opening, Bluetooth audio is recommended. Dimensions 7 1/2" X 10 5/16" without flange. With flange it is 8" x 10 7/8"
Price: $66.95
Finish Preference:
NOTE101-SDS
NOTE101-SDS is a full face Slidedock kit for the Samsung Galaxy NOTE 10.1" model#GT-N8013. This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a dock cable must be glassed or epoxied in to hold the tablet under the retainer lips. When the tablet slides up and away from the dock connector, there is a 3/8" gap to allow for grabbing and removing the tablet. There is a slight recess behind the tablet to allow for camera clearance to prevent scuffing of camera. There are 1/8" overhanging edges on the the dock connector side and top edge of the tablet which allows the tablet to be mounted vertically without a problem. These edges are 3/32" thick. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 7 13/16" X 10 7/8" X 9/16" once the flange edge is removed. With the flange edge it is 8 5/8" x 12". $94.95
Price: $94.95
LG8-SDS
LG8-SDS is a full face Slidedock kit for theLG 8" MODEL LG-VK810. This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a dock cable must be glassed or epoxied in to hold the tablet under the retainer lips. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing the tablet. There is a slight recess behind the tablet to allow for camera clearance to prevent scuffing of camera. There are 1/8" overhanging edges on the the dock connector side and top edge of the tablet which allows the tablet to be mounted vertically without a problem. These edges are 3/32" thick. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 5 9/16" X 9 1/4" X 1/2" once the flange edge is removed. With the flange edge it is 6 3/8" x 10". $79.95
Price: $79.95


Website Builder provided by  Vistaprint