Fifield Fab Custom Car Audio - iPad AND iPad AIR KITS
Fifield Fabrications - YOUR BEST SOURCE FOR ALL YOUR CUSTOM TABLET NEEDS!!!!
AIR-SL
AIR-SL is a spring loaded mounting kit for the iPad AIR and the smaller 9.7" ipad pro. This kit has the same overhanging retainer lip design as our AIR-SDU that hold in the iPad. This kit has a spring loaded back plate. You just drop in the iPad, push it down, and slide it into the dock connector to lock it in under the lips. Dock cable must be glassed in to lock iPad in place. To remove iPad, simply push it away from dock connector and the the iPad pushes out automatically! It also has a nice finished top edge plate like our AIR-SDU as well. Dimensions are 7 7/16" X 10 3/8" without the flange and 8 1/4" X 11" with the flange. $119.95
Price: $119.95
FINISH PREFERENCE:
AIR-SDU
AIR-SDU This is a full face Slidedock universal kit for the ipad air and the smaller 9.7" ipad pro . This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening and a cable must be glassed in to hold iPad. When the tablet slides away from the dock connector, there is a 3/8" gap to allow for grabbing and removing iPad. There are 1/8" overhanging edges on the the dock connector side and top edge of the iPad which allows the iPad to be mounted vertically without a problem. The back plate is solid and flat and can be cut to allow for access to other items. It also has a nice finished top edge plate with rounded corners and beveled edges inside and outside. This can also be mounted by simply screwing it in like a headrest monitor od it can be glassed in for custom applications! Great for home, RV, trailers, or car applications. Dimensions are 7 7/16" X 10 5/16" X 9/16" once the flange edge is removed. With the flange edge it is 8 3/16" x 11". $99.95
Price: $99.95
Finish Preference:
Halo-Full
Halo-Full is a add on modification to the Air-SDU and Air-SL. We incorporate a halo ring into the kit housing and include a LED string of choice that can be epoxied into place on the back after building in your kit. Just needs 12 volt positive and negative.
Price: $69.00
LED Color:
AIR-SDC
AIR-SDC iPad Air SlideDock Connector Opening kit. This kit is the same as our AIR-SD kit with the addition of a connector opening. Kit comes as a full bucket made of ABS plastic with 1/8" overhanging edges all around the front. Either a side or top edge can be cut off to create a slide in dock for vertical or horizontal mounting. Solid back plate can be cut out to expose radio or a/c controls. There is dock connector opening. Dimensions 8" X 10 3/4". Can be cut to a minimum of 7 1/4" X 10". $71.95
Price: $71.95
Finish Preference:
AIR-SD
AIR-SD iPad Air SlideDock kit. Kit comes as a full bucket made of ABS plastic with 1/8" overhanging edges all around the front. Either a side or top edge can be cut off to create a slide in dock for vertical or horizontal mounting. Solid back plate can be cut out to expose radio or a/c controls. There is no dock connector opening, Bluetooth audio is recommended. See our AIR-SDC FOR A KIT WITH A CONNECTOR OPENING. Dimensions 8" X 10 3/4". Can be cut to a minimum of 7 1/4"" X 10". $63.95
Price: $63.95
Finish Preference:
PAD2-SL
PAD2-SL is a spring loaded mounting kit for the iPad 2,3,4. This kit has the same overhanging retainer lip design as our PAD2-SDS that hold in the iPad. This kit has a spring loaded back plate. You just drop in the iPad, push it down, and slide it into the dock connector to lock it in under the lips. Dock cable must be glassed in to lock iPad in place. To remove iPad, simply push it away from dock connector and the the iPad pushes out automatically! Dimensions are 8" X 10 1/4" without the flange and 8 1/2" X 12" with the flange. $119.95
Price: $119.95
iPad style:
FINISH PREFERENCE:
PAD2-SDS
PAD2-SDS This is a full face Slidedock kit. This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening. When the tablet slides away from the dock connector, there is a 1/2" gap to allow for grabbing and removing iPad. We also offer a add-on "EASE OF RELEASE" feature with our Pivoting Back Plate Modification ( PBP-MOD) which can be added to your order. This allows the tablet to be removed without reaching into the kit. There are 1/8" overhanging edges on the the dock connector side and top edge of the iPad which allows the iPad to be mounted vertically without a problem. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 8 1/8"" X 10 9/16" once the flange edge is removed. With the flange edge it is 8 5/8" x 11 1/16". $99.95
Price: $99.95
Finish Prefernce:
iPad style :
PAD2-SDC
PAD2-SDC iPad 2 SlideDock Connector Opening kit. WORKS WITH IPAD 2,3,AND 4. Kit is the same as our PAD2-SD kit with the addition of a connector opening. Kit comes as a full bucket made of ABS plastic with 1/8" overhanging edges all around the front. Either a side or top edge can be cut off to create a slide in dock for vertical or horizontal mounting. Solid back plate can be cut out to expose radio or a/c controls. There is dock connector opening. Dimensions 8 5/8" X 10 3/4". Can be cut to a minimum of 7 3/4" X 10". $71.95
Price: $71.95
iPad style:
PAD2-SD
PAD2-SD iPad 2 SlideDock kit. WORKS WITH IPAD 2,3,AND 4. Kit comes as a full bucket made of ABS plastic with 1/8" overhanging edges all around the front. Either a side or top edge can be cut off to create a slide in dock for vertical or horizontal mounting. Solid back plate can be cut out to expose radio or a/c controls. There is no dock connector opening, Bluetooth audio is recommended. See our PAD2-SDC FOR A KIT WITH A CONNECTOR OPENING. Dimensions 8 5/8" X 10 3/4". Can be cut to a minimum of 7 3/4"" X 10". $63.95
Price: $63.95
PAD1-SDS
PAD1-SDS This is a full face Slidedock kit. This kit is designed to "Drop in" and "lift out" of the kit. There is a dock connector opening. When the tablet slides away from the dock connector, there is a 1/2" gap to allow for grabbing and removing iPad. We also offer a add-on "EASE OF RELEASE" feature with our Pivoting Back Plate Modification ( PBP-MOD) which can be added to your order. This allows the tablet to be removed without reaching into the kit. There are 1/8" overhanging edges on the the dock connector side and top edge of the iPad which allows the iPad to be mounted vertically without a problem. The back plate is solid and flat and can be cut to allow for access to other items. Dimensions are 8 1/4"" X 10 9/16" once the flange edge is removed. With the flange edge it is 9 1/8"" x 11 1/16". $99.95
Price: $99.95
CUSTOM CUT OUT MOD
This is labor Modification add-on only for our SDU, SDS, SDC, OR SD KITS. We can offer a centered single din or double din ISO cut out in the back plate or other options. Please specify single or double din.
Price: $20.00
CUT CHOICE:
PAD-M
PAD-M Custom iPad 2,3,4 mounting kit with pivot for docking. This kit has a pivoting back plate for removal of iPad. A dock connector is required to hold the bottom edge of iPad. There are foam pads on either side of the dock connector opening that push the iPad into the opposing top edge which has a slight reverse ball edge that overhangs the iPad. You remove the iPad by pressing down and toward the dock connector simultaneously to relieve top pressure and remove tablet. If mounted at a back angle, pads are not necessary and pivoting is easier. Designed for custom installation in car or home. PATENT PENDING Dimensions 11 1/4" x 13 9/16" with flange, 8 5/8" x 10 13/16"" without flange. 3/4" depth latching mechanism is 1 9/16" deep from back. $74.95
Price: $74.95
PAD1-M
PAD1-M iPad 1 pivoting mounting kit for custom installation. Must be mounted at an angle, does not lock iPad in place at top edge. Made to order, please allow for additional 2 business days. PATENT PENDING. $79.95
Price: $79.95
Website Builder provided by  Vistaprint